SCULPFUN S30 Pro 10w Laser Module for Laser Engraver
| Dimensions | 31 × 15 × 13 cm |
|---|---|
| Brand | Sculpfun |
| Condition | NEW |
| Optical Power | 10W |
Book a Personalized Product Demo
SCULPFUN S30 Pro 10w Laser Module for Laser Engraver
|
SCULPFUN S30 Pro 10w Laser Module
|
|
|
Product Model
|
SCULPFUN S30 Pro Laser module Set
|
|
Laser output power
|
10W (light energy)
|
|
Inner diameter of air pipe
|
7.5mm (recommended to use 30L/min, 0.03Mpa air compressor, out diameter of nozzle:8mm) Laser wavelength 455±5nm
|
|
Laser type and fixed focus
|
fixed focus laser, fixed focus through 50mm measuring column
|
|
Laser protection cover
|
Equipped with a detachable laser protection cover to protect the eyes. You can adjust it up and down, or remove the goggles.
|
|
Laser shell material
|
aluminum alloy
|
|
Laser circuit board parameters
|
|
|
Circuit Board Size
|
40*40mm
|
|
Circuit Board
|
12V/PWM modulation board
|
|
Input voltage
|
12V
|
|
Max Input of laser module
|
12V 5A
|
|
Wire Rod
|
HY2.0, 3Pin terminal (3-core cable, A: PWM +, B: GND, C: VCC ).
|
|
Fan
|
12V 0.15A 4020 fan
|
|
Fan speed
|
15000 rpm
|
|
Operating temperature
|
-20 ℃ to 70 ℃
|
Main feature:
1. Built-in high-pressure air-assisted nozzle
7.5mm inner diameter air tube acrylic protective cover
Note:
●Because of the powerful laser of S30 Pro, it is forbidden to run the engraving machine unattended. Pause it if you’re not around.
●For detailed machine instructions, please refer to the manual for parameter settings.
●When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.
●Do not touch the laser with your hands, otherwise you may burn your hands.
●Please avoid strong impact on the machine.
●It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult attended.
●Do not use the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser.
Related Products
Related products
₹3,982
Original price was: ₹5,084.₹3,381Current price is: ₹3,381.
Original price was: ₹63,558.₹55,076Current price is: ₹55,076.
Laser Solutions, Delivered Across India!
Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal
Visakhapatnam, Vijayawada, Guntur, Nellore, Kurnool, Itanagar, Tawang, Naharlagun, Pasighat, Ziro, Guwahati, Silchar, Dibrugarh, Jorhat, Nagaon, Patna, Gaya, Bhagalpur, Muzaffarpur, Darbhanga, Raipur, Bilaspur, Durg-Bhilai, Korba, Rajnandgaon, Panaji, Margao, Vasco da Gama, Mapusa, Ponda, Ahmedabad, Surat, Vadodara, Rajkot, Bhavnagar, Faridabad, Gurugram, Panipat, Ambala, Hisar, Shimla, Dharamshala, Solan, Mandi, Una, Ranchi, Jamshedpur, Dhanbad, Bokaro, Hazaribagh, Bengaluru, Mysuru, Mangaluru, Hubballi-Dharwad, Belagavi, Thiruvananthapuram, Kochi, Kozhikode, Kollam, Thrissur, Bhopal, Indore, Gwalior, Jabalpur, Ujjain, Mumbai, Pune, Nagpur, Nashik, Thane, Imphal, Thoubal, Churachandpur, Ukhrul, Bishnupur, Shillong, Tura, Nongstoin, Jowai, Baghmara, Aizawl, Lunglei, Champhai, Serchhip, Lawngtlai, Kohima, Dimapur, Mokokchung, Tuensang, Wokha, Bhubaneswar, Cuttack, Rourkela, Berhampur, Sambalpur, Chandigarh, Ludhiana, Amritsar, Jalandhar, Patiala, Jaipur, Jodhpur, Kota, Bikaner, Ajmer, Gangtok, Namchi, Geyzing, Mangan, Thiruvananthapuram, Chennai, Coimbatore, Madurai, Tiruchirappalli, Hyderabad, Warangal, Nizamabad, Karimnagar, Khammam, Agartala, Udaipur, Kailashahar, Dharmanagar, Bishalgarh, Lucknow, Kanpur, Ghaziabad, Agra, Varanasi, Dehradun, Haridwar, Roorkee, Rudrapur, Haldwani, Kolkata, Howrah, Durgapur, Siliguri, Asansol